Professional colors

In the final processing of the slabs it is possible to find defective materials that show color variations (not black but gray, not rust but beige, not blue but white, etc.) or that have streaks defined as snakes and / or other imperfections.

Today it is possible to solve these problems using the new complete line of colors: COLOR STONE

  • which allows you to restore or add new color to your slabs/tiles
  • can be used on smooth, antiqued, bush-hammered and polished surfaces
  • all colors are applied to the surfaces of the slabs in a horizontal position

This new type of dye restores the stone surface by coloring it uniformly and eliminating the various visible imperfections such as (elephant paws), light or dark spots – formed by quartz or other structural materials of the granite that coming up on the surface make it look defective and limit its commercial value.

BLACK in its three variants, BLACK – BLACK XX – BLACK SPECIAL is a particular product with impregnating agent that is able to standardize the color of the material hiding any stains or different colors and mask imperfections increasing the commercial value of it and gives the same water repellent characteristics.


On slabs with 800/1000 grit:

– allow the slab to dry completely and perfectly, apply the product with a suitable roller on the material placed horizontally.

– leave to dry for 2 days in the open air or in the oven at a temperature not exceeding 35 degrees

– once the product has dried, the slab can be cleaned with the use of 3 or 4 nylon brushes.

On polished slab:

– allow the slab to dry perfectly and make sure it has not been previously treated with any other product or wax, at this point apply with a roller on a horizontal slab.

– leave to dry for 2 days in the open air or in the oven at a temperature not exceeding 35 degrees, once the product has dried, you can proceed with cleaning the slab with polishes

IMPORTANT: before application, check that the slabs have not been previously treated or waxed. It is also recommended that the product is always spread over slabs that are perfectly dry even in thickness.

Our products are available in:

  • Tanks of 5 – 10 – 25 Lt
  • Tanks of 1.000 Lt
WARNINGS: it is advisable to always perform a test to check the effectiveness of the product. The product must be stored in the original containers, hermetically closed between 5 ° and 30 ° C of temperature, away from heat sources and protected from sunlight.
All information and recommendations contained herein are based on information and tests that we believe to be reliable; However, not knowing the conditions regarding the materials processed and the methods of implementation in which the product is used, we decline all responsibility for the suitability of the product for each particular application. It is the user’s task to check under his own responsibility whether the product described is suitable for the use for which it is intended
YIELD: 25/30 sqm2 / Lt