IMPREGNATING AND REPELLENT
IDRO-LIT
IDRO-LIT is a water-repellent protective agent suitable for marble, granite, natural stone in any finish: rough polished polished
It guarantees an excellent water repellency to the treated materials. It limits the problems caused by rain, humidity and capillary rising after the laying of floors
It also prevents the formation of oxide and / or rust stains, enhancing and extending the duration and intensity of the gloss.
The protective action of IDRO-LIT is long-lasting and does not alter the natural color of the treated materials, does not yellow and does not form anti-aesthetic cracking.
USE ON PRODUCTS:
apply IDRO-LIT evenly with a brush, short-haired roller or absorbent paper. After installation, to avoid absorption stains, apply a greater quantity of product on the rough side and on the edges of the product in the same way. Let the product dry for at least 2 days.
USE ON COVERINGS:
apply IDRO-LIT the same treatment as above if the covering is mounted with clamps or mechanical supports. For covering fixed with cementitious mortars, treat only the visible surface with IDRO-LIT. On coatings already installed apply by spray from bottom to top.
YIELD: 8-15 sqm / LT
IDROLIT H2O
Water based without solvent.
OLEO-REP
OLEO-REP is a solvent-based stain-resistant impregnating agent. It is used for the treatment of surfaces of marble, granite with a glossy, patinated, rough, brushed, matte or fine polished finish. OLEO-REP confers excellent hydro-oil repellent properties to the treated stones, without altering their surface characteristics and color. It does not yellow over time and resists UV rays, making the protective action durable over time. It finds application in the protection of worktops, kitchens, bar counters, tables, floors etc.
METHOD OF USE:
• Apply OLEO-REP uniformly on dry and clean surfaces with a brush, short-haired roller or absorbent paper.
• Remove the surface residues of the product with absorbent paper.
• Leave to dry at least 48h
• If necessary, apply a second coat after 24 hours
YIELD:
• very absorbent materials: 5-7mq / lt
• other materials: 8-15 sqm / LT
OLEO-REP H20
Water based without solvent.
SOLVENT ANTIGRAFFITI
ANTIGRAFFITI is a stain-resistant protective agent for marble and granite. The product is water based and completely free from volatile organic solvents. Enter the macrosities by precluding the entry of liquids but leaving the natural properties of the materials unaltered.
It has an excellent pearling effect and excellent anti-graffiti actions, it does not create surface films and does not alter the natural color of the stone.
METHOD OF USE:
• Apply ANTIGRAFFITi on dry and clean surfaces, by brush, by spraying with a cloth or sponge. Make sure it is applied evenly over the entire surface to be treated.
• Clean up any excess with a microfibre cloth.
• Treat the surface at least twice with an interval of 10-15 minutes from each application. The desired effect will be achieved 48 hours after the treatment
SURRENDER:
• 30M / KG on glossy surfaces
• 15M / KG on very absorbent surfaces
ANTIGRAFFITI H20
Water based without solvent
ANTI-SAL
ANTI-SAL is a product for the treatment of marbles subject to the formation of efflorescence, which show small surface break points and gradually lose their gloss. Such problems are typically found in the GALALA in the YELLOW ATLANTIS and in the PAPYRUS (generally Egyptian materials) in the TRANI. ANTI-SAL gives excellent hydro-oil repellent properties to the treated surfaces.
METHOD OF USE:
• Manual: apply neat. Spray ANTI-SAL on the surface and smooth with a short-haired roller. Once the material has absorbed the product, remove any residues with a microfibre cloth moistened with the product itself. Leave to dry at least 4-5 hours before handling.
• The product must be used on the last finish.
• If the last finish is rough or smooth, the product is applied over the slab evenly using a roller and left to dry for 5 hours.
• If, on the other hand, the last finish is glossy, the product is applied over the slab evenly by means of a roller, left to dry for 5 hours after which if an excess of product remains on the slab, pass a cloth over it until the desired effect is obtained .
• Automatic: apply in the polishing line immediately after the fans using a waxing machine. Leave to rest for 24 hours.
SURRENDER:
• 12-20sqm / kg
WAX for WAXER
WAX for WAXING MACHINE is an innovative product that contributes to increasing the commercial value of stone materials by increasing the quality of the polish and intensifying the original color. It is a product suitable for the treatment of granite and colored marble with a glossy or satin finish. It hides the thinness of the materials, closing the micro-cracks present.
The materials treated with WAX for WAXING MACHINE take on water repellent characteristics, increasing the resistance of the polish to the disintegrating actions of water, sunlight and atmospheric agents.
USE:
• Manual application: pour small quantities of product onto the surface to be treated and even out with absorbent paper. After a few minutes, clean up the excess and polish with a microfiber cloth.
• Automatic on glossy plates: apply the product in line using the waxing machine.
YIELD: 25/35 sqm / LT
50/80 sqm / LT
WAX H20
WAX H2O is an innovative water-based product that helps to increase the commercial value of stone materials by giving them a polishing and toning effect. Cera eco is an emulsion of active ingredients that are not harmful to health and safe for the end user to handle.
The materials treated with WAX H2O assume a good resistance over time to the glossy effect although periodically applications of the product are to be expected to restore the initial effect.
USE:
• Manual application: apply by spray or with absorbent paper, making the surface of the treated material uniform. Leave to dry for a few minutes and remove excess product if necessary.
• Automatic application: dilute 50% with water. Apply the product with a waxing machine.
YIELD: 20/30 sqm / LT
WAX H2O S
It is a product capable of giving stone materials a good polishing and equalizing effect. Thanks to its particular formulation, it offers good penetration and therefore resistance over time to the glossy effect. The handling does not require special precautions as it does not contain harmful ingredients.
USE:
• Dilute 50% of the product with 50% of water
• Apply by spray or paper, evenly covering the surface of the material
• Let it dry for a few minutes
• Remove residues with a paper swab.
MICROLIT
MICROLIT is an innovative product that can be colored with various pigments and which helps to increase the quality of the gloss and intensifies the color of the treated materials.
The materials treated with MICROLIT take on water-repellent characteristics, increasing the resistance of the polish to the disintegrating actions of water, sunlight and atmospheric agents.
Microlit is a product suitable for the treatment of colored marble and granite, ideal for the treatment of slabs, statues and tomb works.
USE:
• Manual application on glossy slabs: drop the product by dripping onto the dry surface of the slab placed horizontally and smooth the product with the aid of a cloth or paper pad. Leave to act for a few seconds and pull the product with dry paper. Finally, polish with a microfibre cloth.
• Application with automatic waxing machines: apply the product in line with the waxing machine (neutral product).
YIELD: manual 30/40 sqm / LT
Automatic 60-100mq / lt
MICROLIT COLOR
MICROLIT COLOR is an innovative product that contributes to increasing the quality of the gloss and intensifying the color of the treated materials.
The materials treated with MICROLIT COLOR take on water-repellent characteristics, increasing the resistance of the gloss to the disintegrating actions of water, UV rays, smog etc.
MICROLIT COLOR is a product suitable for the treatment of colored marble and granite lacking gloss and inadequate natural color. Tones and protects materials such as Pietra Serena, Indian, Brazilian and Cardoso Quartzites. Enhances the color of resin quartz opacified by the aggression of UV rays. It is particularly suitable as a water repellent for cement and concrete agglomerates, it avoids the washout of the original color of the artifacts caused by the acid pH inherent in the cement compounds.
USE:
• Manual application on glossy slabs: drop the product by dripping onto the dry surface of the slab placed horizontally and smooth the product with the aid of a cloth or paper. Leave to act for a few seconds and remove product residues with dry paper. Finally, polish with a microfibre cloth.
• Application with automatic waxing machines: apply the product in line with the waxing machine
YIELD: manual 30/40 sqm / LT
Automatic 60-100mq / lt
WET
Product formulated to give a wet effect to marble and revive the color of granite.
It gives water-repellent characteristics, increases the quality of the polish and intensifies the natural color of the treated stones.