authorized dealers for pemo pumps and spare parts

HYDRAULIC POWER UNITS FOR FILTERPRESS

Hydraulic power packs are extremely powerful tools which, thanks to the oil pressure, can generate great force. In fact, hydraulics is used to operate tools such as industrial presses, hydraulic excavators and hoists.

HIDRO BAG

It is a practical expansion cushion for the excavation and handling of blocks, consisting of two sheets of high-strength steel. It is filled with pressurized water, allowing an expansion of about 25 – 30 cm or more, exerting a thrust of up to 1000 tons on the block.

PLATES FOR FILTER PRESS

Eurokem sells plates for filter presses of every model and of every size; from the smallest 250 × 250 mm to the largest 2000 × 2000 mm according to the specifications requested by the customer.

SMALL QUARRY EQUIPMENT

Eurokem carries out its work alongside all the work that revolves around the processing of marble, therefore offers among its range of products hammers and stakes for quarries, safety clothing and footwear for complete safety at work

A mechanical seal is defined as an equipment which, installed on a rotating shaft of a fluid handling machine (stirrer pumps, mixer, etc.), prevents the fluid (liquid, gas or dust) from dispersing into the external environment from inside the machine itself.

PERISTALTIC PUMPS

This type of pump allows you to accurately calibrate the water flow and keep it constant. These characteristics make it ideal where precision on dosages and repeatability of the measurement are indispensable requirements such as in chemical laboratories, etc. It applies the principle of peristalsis, according to which the prevalence of the treated fluid is impressed by a restriction that runs along the tube. Eurokem offers you the best range on the market, offering its advice and constant assistance.

PISTON DOSING PUMPS

They are reciprocating pumps. The flow rate is determined by the reciprocating movement of the piston, driven by an eccentric or a crank connecting rod. In order for this reciprocating movement to be reproduced on the suction and delivery head, non-return valves are mounted and this means that the flow itself is intermittent, the frequency of which is determined by the number of strokes of the piston.

SUBMERSIBLE PUMPS

The submersible electric pumps are used in pumping stations, first rain tanks and sewer bypasses and guarantee the correct functioning of the water network. These submersible pumps are used for the transfer of dirty water and sludge, thanks to the possibility of treating abrasive sludge and shredding solid elements, they are particularly effective in purging and wastewater management operations and for installation they do not require any masonry intervention. . Eurokem ensures exceptional pump life and a drastic reduction in both machine downtime and maintenance costs.

IMPULSE PUMPS

This type of pump allows to precisely calibrate the flow rate of the product and to keep it constant. These characteristics make it ideal where precision on dosing and repeatability of the measurement are indispensable requirements such as in chemical laboratories, etc. Eurokem offers you the best range on the market, offering its advice and constant assistance.

PUMPS FOR SLUDGE RELEASE

We are able to supply all types of pumps for handling any type of water. From wastewater loaded with abrasive or corrosive elements to clear and clarified water with flow rates from 100 l / min to 10,000 l / min Vertical pumps: Derived from those for processing granite, they are used to transfer sludge to decanters and feed of hydrocyclones, particularly for abrasive slurries.

PUMPS FOR CENTRIFUGAL FILTER PRESS (PERISSINOTTO and GINORDI etc.)

Designed for sludge and / or acid applications.

The centrifugal pumps for filter press feeding guarantee maximum filling speed combined with a final mud panel with low residual humidity. They can be mounted with two-speed motors ensuring a homogeneous filling of the filter with the first and a higher sludge compaction with the second, or with inverter-controlled motors.

Flow rates vary from 5 to 900 m3 / h. Suitable for: Under head applications, Abrasive liquids, Acid liquids even with suspended solids. Operating temperature up to 90 ° C

Types of sealing:

Mechanical seal with double flushed face rings or with permanent lubrication

Minimum maintenance

Pump / motor coupling: By means of pulleys and trapezoidal belts – By means of elastic coaxial joint

The pumps have two bodies installed on the same shaft so that, by operating in series, high pressures (up to 12/15 atm) can be obtained, particularly suitable for feeding filters for high pressures.

PUMPS FOR MEMBRANE FILTER PRESS (WILDEN PUMPS)

The pump is the beating heart of the filter press and the choice of the same as well as determining the performance of the system in number of cycles and m3 of sludge produced per hour and the main component that determines the percentage of sludge dehydration and residual moisture in the panels.

They are easy to manage, resistant to dry running, self-priming (up to 7.5 m), and are adjustable by varying the pressure of the compressed air. They stand out for their high performance and for their low weight which makes them versatile. Given their versatility and the wide range of materials available, they are suitable for the transfer of very viscous, abrasive fluids containing solid particles with dimensions up to 19 mm of dry powders that can be treated in certain conditions of solvents, acids and even of food liquids. Special versions are available for the food industry and for high pressures up to 17 Bar. A wide range of accessories completes the production

BIG-BAG

They are polypropylene big bags that facilitate the handling and transport of various materials, such as granules, fertilizers, plastics, sludge, waste, etc. These bags can be moved with forklifts or simply by placing them on pallets. On the market there are different types of this product: closed bottom, candy opening, loading and unloading valves. They can be of different sizes and capacities, standard or UN approved. Eurokem is at your disposal to provide you with more information and a free quote

BRUSHES FOR INDUSTRIAL USE

The range of brushes we offer is very wide, our company also offers you a technical-commercial consultancy service at the highest levels of professionalism and is ready to schedule a meeting to evaluate your needs together.

MECHANICAL SEALS OF ALL TYPES AND DIMENSIONS

A mechanical seal is defined as an equipment which, installed on a rotating shaft of a machine for handling fluids (agitation pumps, mixer, etc.), prevents the fluid (liquid, gas or dust) from dispersing into the external environment from inside the machine itself.

VALVES FOR SILOS

Automatic and manual valves for settling silos and pipes used in the lime dosage in granite frames. The automatic and manual valves are fully rubberized with a special containment sleeve. Automatic valves can be single-lung or double-lung. The automatic valves are all air-operated.

SUPPLY OF SPARE PARTS

ASSISTANCE AND DELIVERY