ELECTROFLOC LINE
It represents a valid solution in special cases where the action of the flocculant is not adequate to obtain a good separation and relative sedimentation of the sludge in the process waters. In fact, the use of ELETTROFLOC preflocculant, combined with the normal use of the flocculant, guarantees a purified water quality in line with the needs of modern stone processing.
How to use: ELETTROFLOC products must be inserted into the circuit before dosing the flocculant, usually, in the sludge collection well using a container with a tap or with dosing (recommended method) using a dosing pump.
ELETTROFLOC NC – chloride-free and non-corrosive.
WARNINGS: it is advisable to always perform a test to verify the effectiveness of the product. The product must be stored in the original containers, hermetically closed between 5 ° and 30 ° C of temperature, away from heat sources and protected from sunlight.
All information and recommendations contained herein are based on tests that we believe to be reliable; However, not knowing the conditions of the treated materials, we decline all responsibility for the suitability of the product for each particular application. In fact, it is the user’s responsibility to verify, under his own responsibility, whether the product described is suitable for the use for which it is intended and then proceed to the preliminary tests.
